Browsing by Author "ABABII, N."

Sort by: Order: Results:

  • SIEBERT, L.; TERASA, M. I.; ABABII, N.; LUPAN, O.; ADELUNG, R. (Tehnica UTM, 2019)
    Sensors start to play an ever increasing role in human life and new technologies for their cost-effective mass production are required. In this work, the one-step 3D-printing of nanoflakes - nanowire covered Fe2O3/Fe - ...
  • CRETU, V.; ABABII, N.; POSTICA, V.; MAGARIU, N.; HOPPE, M.; VERJBITKI, V.; SONTEA, V.; ADELUNG, R.; LUPAN, O. (Tehnica UTM, 2019)
    Copper oxide nanostructured films were synthesized via a chemical synthesis (SCS) method and annealed in low vacuum. The morphological properties were investigated using scanning electron microscopy (SEM). The elaborated ...
  • ABABII, N.; POSTICA, V.; CRETU, V.; LAZARI, E.; SONTEA, V.; LUPAN, O. (Technical University of Moldova, 2016)
    In presents, it is well known that diagnose of human diseases tends to use non-invasive diagnostic methods. They not cause discomfort to patients and the samples are collected rapidly without necessity of special conditions. ...
  • POSTICA, V.; LUPAN, O.; ABABII, N.; HOPPE, M.; ADELUNG, R.; CHOW, L.; SONTEA, V.; ASCHEHOUG, P.; VIANA, B.; PAUPORTÉ, Th. (SPIE, 2018)
    In this work, zinc oxide (ZnO) nanostructured films were grown using a simple synthesis from chemical solutions (SCS) approach from aqueous baths at relatively low temperatures (< 95 °C). The samples were doped with Pd ...
  • GURSCHI, I. (Universitatea Tehnică a Moldovei, 2020)
    Scopul lucrării: constă în dezvoltarea unui sistem de igienizare a dinților cu ultrasunet pentru a face tratamentul parodontitei accesibil și efficient pentru toate segmentele populației.
  • ABABII, N.; POSTICA, V.; CREŢU, V.; RAILEAN, S.; ŞONTEA, V.; LUPAN, O.; MONAICO, E. (Technical University of Moldova, 2015)
    Nanostructured Al- and Ag-doped films were deposited by synthesis from aqueous chemical solutions SCS. It was demonstrated change in selectivity of sensors based on the doped films. For Ag-doped films has been obtained ...
  • ABABII, N.; MAGARIU, N.; ȘONTEA, V.; TROFIM, V.; CREŢU, V.; RAILEAN, S.; LUPAN, O. (Tehnica UTM, 2018)
    Nanostructured films of copper oxide co-doped with Ag and Ni were deposited by synthesis from aqueous chemical solutions SCS. Effects of rapid and long term thermal treatments on morphological and structural properties has ...
  • ABABII, N.; ULFA, M.; HOPPE, M.; VAHL, A. (Tehnica UTM, 2019)
    Cererile ridicate de aplicații pentru senzori de înaltă performanță indică importanța controlului precis al parametrilor oxizilor semiconductori. Pentru a îmbunătăți aceste performanțe prezentăm în lucrarea dată pelicule ...
  • CRETU, V.; POSTICA, V.; ABABII, N.; MAGARIU, N.; SONTEA, V.; SCHÜTT, F.; ADELUNG, R.; LUPAN, O. (Tehnica UTM, 2015)
    In this work, the effect of different dopants on selectivity performance of gas sensor structures based on CuO nano-structured films that were synthesized from aqueous chemical solutions SCS is reported.
  • CRETU, V.; POSTICA, V.; ABABII, N.; SCHÜTT, F.; HOPPE, M.; SMAZNA, D.; TROFIM, V.; SONTEA, V.; ADELUNG, R.; LUPAN, O. (Sumy State University, 2015)
    The synthesis via chemical solutions (aqueous) (SCS) wet route is a low-temperature and cost-effective growth technique of high crystalline quality oxide semiconductors films. Here we report on morphology, chemical ...
  • CRETU, V.; POSTICA, V.; ABABII, N.; TROFIM, V.; RAILEAN, S.; LUPAN, O. (Technical University of Moldova, 2016)
    Molybdenum trioxide (MoO3) due to its unique physical and chemical properties is one of the most attractive candidates for different promising technological applications]. (MoO3 has a unique morphology that resembles a ...
  • ABABII, N.; POSTICA, V.; HOPPE, M.; ADELUNG, R.; LUPAN, O.; RAILEAN, S.; PAUPORTÉ, T.; VIANA, B. (Society of Photo-Optical Instrumentation Engineers, SPIE, 2017)
    The most important parameters of gas sensors are sensitivity and especially high selectivity to specific chemical species. To improve these parameters we developed sensor structures based on layered semiconducting oxides, ...
  • POSTICA, V.; HÖLKEN, I.; BUMKE, L.; BAUM, M.; ABABII, N.; LUPAN, O.; ADELUNG, R. (Technical University of Moldova, 2016)
    Traditional gas sensors and biosensors based on metal oxide micro- and nanostructures, which are widely investigated in the past decades, have very high electrical resistivity (in range of MΩ – TΩ). Such high resistivity ...
  • CRETU, V.; POSTICA, V.; ABABII, N.; SONTEA, V.; LUPAN, O. (Sumy State University, 2014)
    Detection of hydrogen gas in industry, biomedical systems and combustion systems is important for safety reasons. Silver doping in zinc oxide and zinc doping in copper oxide were investigated to obtain improved hydrogen ...
  • VAHL, A.; DITTMANN, J.; JETTER, J.; VEZIROGLU, S.; SHREE, S.; ABABII, N.; LUPAN, O.; AKTAS, O. C.; STRUNSKUS, T.; QUANDT, E.; ADELUNG, R.; SHARMA, S. K.; FAUPEL, F. (IOP Publishing Ltd, 2019)
    Morphology is a critical parameter for various thin film applications, influencing properties like wetting, catalytic performance and sensing efficiency. In this work, we report on the impact of oxygen partial flow on the ...
  • LUPAN, O.; POSTICA, V.; ABABII, N.; HOPPE, M.; CRETU, V.; TIGINYANU, I.; SONTEA, V.; PAUPORTÉ, Th.; VIANA, B.; ADELUNG, R. (ELSEVIER, 2016)
    In this study, the impact of different morphologies of p-type copper oxide nanostructures on hydrogen gas response is investigated. Sensor structures based on CuO nanowire (NW) networks demonstrated much higher gas response ...
  • ABABII, N.; MARGARIU, N.; HOPPE, M.; TERASA, M.; POSTICA, V.; CREŢU, V. (Tehnica UTM, 2019)
    Nanostructurile de oxid de cupru sunt materiale fascinante datorită proprietăților electrice, optice, termice și senzoriale remarcabile, dat fiind faptul că este posibil stabilizarea fazelor specific în mod unic la dimensiuni ...
  • POLONSKYI, Oleksandr; VAHL, A.; DREWES, J.; HINZ, A.; STRUNSKUS, T.; ABABII, N.; REIMER, T.; CHEMNITZ, S.; LUPAN, O.; ADELUNG, R.; FAUPEL, F. (Sumy State University, 2018)
    In this paper, we report on a recent progress in formation and deposition of NPs by the gas aggregation method. Examples range from noble (Au, Ag), through reactive (Al) to more advanced core-shell nanostructures [4]. The ...
  • CRETU, V.; ABABII, N.; POSTICA, V.; TROFIM, V.; RAILEAN, S.; POCAZNOI, I.; LUPAN, O. (Tehnica UTM, 2014)
    Nanocrystallite metal oxide films have attracted great attention for their applications in chemical sensors [1], biosensors [2] and for antimicrobial applications [3]. In this context, copper oxide it is well known as ...
  • POSTICA, V.; HOPPE, M.; ABABII, N.; TROFIM, V.; RAILEAN, S.; ADELUNG, R.; LUPAN, O. (Institute of Electrical and Electronics Engineerings, IEEE, 2016)
    Rapid progress of nanotechnology in recent years and continuous minimization of portable devices created the necessity of multifunctional devices elaboration. In this work, the morphological, structural and sensing properties ...

Search DSpace

Browse

My Account