Browsing Conferinţe by Title

Sort by: Order: Results:

  • 2D Materials Nanotechnologies Between Great Expectations and Lost Illusions 
    DRAGOMAN, Mircea (Tehnica UTM, 2015)
    This talk will be a review of the state of the art of 2D materials starting with graphene. The graphene discovery and latter of other 2D materials have produced a revolution in nanotechnology. New physical phenomena were ...
  • 2D materials nanotechnologies between great expectations and lost illusions 
    DRAGOMAN, Mircea (Technical University of Moldova, 2015)
    This talk will be a review of the state of the art of 2D materials starting with graphene. The graphene discovery and latter of other 2D materials have produced a revolution in nanotechnology. New physical phenomena were ...
  • 2D semiconductor-metal quasi-periodic structures for photonics 
    MONAICO, Eduard (Technical University of Moldova, 2015)
    We report on fabrication of metal nanotubes in semiconductor nanotemplates possessing ordered two-dimensional hexagonal arrays of pores grown in semiconductor substrates using anodic etching in neutral electrolyte.
  • 3D Nanoarchitectures – a Novel Class of Materials: Perspective for Sustainable Development 
    FOMIN, Vladimir M. (Universitatea Tehnică a Moldovei, 2023)
    Extending nanostructures into the third dimension has become a vibrant research avenue in condensed-matter physics, because of geometry- and topology-induced phenomena. Modern advances of high-tech fabrication techniques ...
  • 3D studies of orobanche cumana seeds by digital holographic microscopy 
    DUCA, Maria; PEDRINI, Giancarlo; CLAUS, Daniel; ABASKIN, Vladimir; ACHIMOVA, Elena; GLIJIN, Aliona; ACCIU, Adriana (Tehnica UTM, 2014)
    Combining microscopy and digital holography (DH) offers the unique advantage of simultaneously capturing complete 3D information about the specimen, and under coherent illumination it has been investigated for continuous ...
  • 3D-Printed Sensor Array of Semiconducting Oxides 
    SIEBERT, L.; TERASA, M. I.; ABABII, N.; LUPAN, O.; ADELUNG, R. (Tehnica UTM, 2019)
    Sensors start to play an ever increasing role in human life and new technologies for their cost-effective mass production are required. In this work, the one-step 3D-printing of nanoflakes - nanowire covered Fe2O3/Fe - ...
  • 3D-Printed Sensors of Nanostructured Semiconducting Oxides 
    LUPAN, Oleg (Universitatea Tehnică a Moldovei, 2021)
    3D printed sensors will play an important role in the world of modern devices and are crucial nowadays due to complexity of mounting on various equipment for the development of biomedical or monitoring systems. Mixing ...
  • 4-Quadrant interpretation of the Speed Spot Plot Asymmetry for Arrhythmia Detection 
    SOKOL, Y.I.; SHYSHKIN, M.A.; BUTOVA, O.A.; AKHIIEZER, O.B.; DUNAIEVSKA, O.I. (Universitatea Tehnică a Moldovei, 2021)
    Today, The World Health Organization estimates that by 2030, about 25 million people will die from cardiovascular disease every year, meaning that heart disease will remain the leading cause of death. One of the most common ...
  • 5th International conference on Nanotechnologies and Biomedical Engineering ICNBE-2021. Program and Abstract Book 
    Technical University of Moldova; Moldavian Society of Biomedical Engineering; SONTEA, Victor; TIGINYANU, Ion; RAILEAN, Serghei (Universitatea Tehnică a Moldovei, 2021)
    ICNBME-2021 continues the series of International Conferences in the field of nanotechnologies and biomedical engineering. The conference aims at bringing together scientists and engineers dealing with fundamental and ...
  • 6th International conference on Nanotechnologies and Biomedical Engineering ICNBE-2023. Abstract Book 
    Technical University of Moldova; Moldavian Society of Biomedical Engineering; SONTEA, Victor; TIGINYANU, Ion; RAILEAN, Serghei (Technical University of Moldova, 2023)
    The conference covers a wide range of subjects of primary importance for research and development such as nanotechnologies and nanomaterials; bio-micro/nano technologies and devices, biomaterials for medical applications, ...
  • AAA protocol in IoT 
    CAZAC, Marin (Universitatea Tehnică a Moldovei, 2021)
    This document is representing not only the description of AAA protocol. It is representing real production problems which I encountered in many years of work with it. Each from this problem was taken separately. It was ...
  • Abordarea filosofică a identităţii feminine:elogiu sau discriminare 
    FURTUNĂ, Elena (Tehnica UTM, 2016)
    The role of women in society has been greatly overseen in the last few decades but now are coming to a more perspective to people. In the early days women were seen as wives who were intended to cook, clean, and take care ...
  • Abordarea timpului din perspectivă filosofică şi realitate contemporană 
    GUZUN, Sandu (Tehnica UTM, 2012)
    Timpul cunoscut de om ca cea mai mare enigmă care pînă în prezent nu poate fi descoperita,ca şi existenţa a tot puternicului Dumnezeu este abordat din diferite perspective. Abordarea timpului din perspectivă filosofică ...
  • Abordări în dezvoltarea sistemelor ”întrebare – răspuns” 
    CARCEA, Liviu (Technical University of Moldova, 2011)
    Acest articol este o încercare de analiză a abordărilor ale sistemelor ”întrebare-răspuns”(SIR). În ultimii ani se observă un interes deosebit pentru sistemele “întrebare-răspuns”, care a condus la o schimbare calitativă ...
  • About physical transformers to create toxicity biosensors 
    ORLOV, А. Т.; MАКSIMCHUK, N. V.; SPIVAK, V. М.; MESHANINOV, S. К. (Tehnica UTM, 2016)
    There are proposed to solve the task of improving noise immunity biosensor systems and simultaneous determination of several toxic substances proposed to solve through the use of two or more individuals converters ...
  • About possible methodology of information systems modeling using graph logic language 
    ORLOVSKI, Ian (Technical University of Moldova, 2011)
    In the article will be examined variant of application graph logic language for modelling information systems. With this purpose after comparison of some existing methodologies will be proposed ways for language use, ...
  • About the green band nature in the PL spectra of ZnS:Al crystals annealed in Bi and Pb based melts 
    SUSHKEVICH, Konstantin; SOBOLEVSKAYA, Raisa; KOROTKOV, Vitalii; BRUK, Leonid; KETRUSH, Peter (Technical University of Moldova, 2005)
    The photoluminescence at 77K of ZnS and ZnS:Al single crystals annealed in the Pb, Pb+0,2wt% PbCl2, and Bi+1,5•10-3wt% Al melts was investigated. It is shown that during the annealing process in the near the surface region ...
  • About the properties of the heterostructure based on the nano scale layers (In2O3 + 5%Sn) - p – Si at the change of the gas environment 
    IL’CHENKO, V. V.; YUSHCHENKO, A. V.; GUL, R. V.; IL’CHENKO, L. G. (Technical University of Moldova, 2005)
    In this work the properties of the heterostructure (In2O3+5%Sn ) -p-Si with the mass thickness of the nano scale layer about 18 nm at the change of the gas environment from the laboratory atmosphere to the saturated vapor ...
  • About the Using of Polarization Methods in Investigating the Polarization Sensitive Nanosystems 
    ZENKOVA, C.Yu.; SOLTYS, I. V. (Technical University of Moldova, 2011)
    The paper shows the possibilities of defining the degree of correlation of mutually orthogonal superposing circularly-polarized and linearly-polarized plane waves. The proposed results widen possibilities of metrological ...
  • Absorption and Emission Spectra of Ga0.017Ge0.25As0.083S0.65 Glasses Doped with Dy3+ 
    LUPAN, Elena; CIORNEA, Viorel; IOVU, Mihail (Technical University of Moldova, 2009)
    The absorption spectra in the visible and near IR regions for Ga0.017Ge0.25As0.083S0.65 are investigated. The visible luminescence from Dy3+, and co-doped with Ho3+ and Dy3+ ions embedded in Ga0.017Ge0.25As0.083S0.65 glass ...

Search DSpace


Browse

My Account