Facultatea Calculatoare, Informatică şi Microelectronică: Recent submissions

  • Privacy and mutual authentication under temporary state disclosure in RFID Systems 
    ȚIPLEA, Ferucio Laurențiu; HRISTEA, Cristian; RODICA, Bulai (Technical University of Moldova, 2022)
    In this paper, we amply discuss how temporary state disclosure affects mutual authentication and privacy of RFID protocols, and illustrate this on two well-known protocols. We argue then in favor of using the PUF technology ...
  • Multi-modal multi-view emotion detection using non-negative matrix factorisation 
    GROZAVU, Nistor; KHALAFAOUI, Yasser; ROGOVSCHI, Nicoleta (Technical University of Moldova, 2022)
    Through this work we explore the unsupervised topological learning of multimodal data presenting a complex structure allowing to learn their representations. We are particularly interested in heterogeneous data whose ...
  • CuO-plate decorated ZnO nanostructures and their sensing performances 
    LITRA, Dinu; LUPAN, Cristian; ZADOROJNEAC, Tudor; CHIRIAC, Maxim; DEPRI, Nadine; LUPAN, Oleg; ADELUNG, Rainer; SIEBERT, Leonard (Technical University of Moldova, 2022)
    In this paper, we report on the gas sensing properties of mixed oxide Zn-Cu nanostructures obtained by selforganized chemical deposition are presented. The nanosensors are made from individual ZnO whiskers and are coated ...
  • Recent trends in solar cell development and characterization - an overview 
    WAGNER, Jan-Martin (Technical University of Moldova, 2022)
    For solar cell companies to stay in the market, fundamentally new industrially feasible cell structures and manufacturing concepts are needed. In this talk I will review the relevant development efforts, considering the ...
  • Functional Metal Oxide Surfaces: Photocatalytic, Self-Cleaning, Sensing, and Micro/Nanostructuring Applications 
    VEZIROGLU, Salih; SHONDO, Josiah; FAUPEL, Franz; AKTAS, Oral Cenk (Technical University of Moldova, 2022)
    Titanium oxide (TiO2) is one of the most used photocatalytic materials for various applications such as environmental remediation, (solar)water splitting, and self-cleaning due to its high activity, low cost, high chemical, ...
  • Synthesis and chemical gas sensing properties of WO3 nanomaterials 
    GALSTYAN, Vardan; BORSI, Matteo; D'ARCO, Annalisa; LUPI, Stefano; COMINI, Elisabetta (Technical University of Moldova, 2022)
    Herein, we report a novel synthesis method for the fabrication of WO3 nanostructures. We performed the synthesis of nanomaterials by the thermal treatment of tungsten thin films using sodium chloride and distilled water. ...
  • Initiated chemical vapor deposition of tailored polymer thin films for electronic applications 
    SCHRÖDER, Stefan (Technical University of Moldova, 2022)
    Device miniaturization and the consequent need for new thin film materials on the nanoscale is a current trend in electronic devices in research as well as industrial production lines. The solvent-free, single-step initiated ...
  • Nanoparticle beam deposition methods for functional electronics 
    VAHL, Alexander (Technical University of Moldova, 2022)
    Owing to their high surface-to-volume ratio, their small size and the high number of intrinsic defects, nanoobjects such as nanoparticles exhibit properties that go beyond typical bulk materials. In particular, nanogranular ...
  • Mixed Reality Technology in Support of Cultural Heritage 
    POPOVICI, Dorin-Mircea (Technical University of Moldova, 2022)
    Facing the challenges that the Covid 19 pandemic imposed on all of us, i.e., maintaining a safe social distance or avoiding direct physical contact, we designed and implemented a VR-oriented solution that allows the users ...
  • Nanosensors and Sensors Based on Heterostructured Materials for Safety and Biomedical Applications 
    LUPAN, Oleg; PAUPORTÉ, Thierry; HANSEN, Sandra; ADELUNG, Rainer (Technical University of Moldova, 2022)
    The challenges of using the properties of semiconducting oxides for practical application will be discussed and strategies for the fabrication, characterization, and integration of nanodevices through new technologies will ...
  • Enabling connected mobility via reliable and low-latency communication 
    ȚURCANU, Ion (Technical University of Moldova, 2022)
    Modern vehicles integrate hundreds of embedded devices forming complex wired on-board networks. Many of these on-board networked systems are successfully fulfilling stringent system and communication requirements, such as ...
  • Hybrid Wireless Vehicular Communications and Information Technologies for Vehicle Safety and Driver Assistance 
    DIMIAN, Mihai; CĂILEAN, Alin; ZADOBRISCHI, Eduard; COSOVANU, Lucian; BEGUNI, Cătălin; AVĂTĂMĂNIŢEI, Sevastian (Technical University of Moldova, 2022)
    This presentation follows the main challenges and research directions in the area of hybrid wireless vehicular communications and the progress made in our research group in developing wireless communication systems for ...
  • Porous materials for electrical gas sensors and actuators without moveable part 
    ADELUNG, Rainer (Technical University of Moldova, 2022)
    This talk briefly summarizes the work of our group over the last decade, showing how highly porous materials can be used as both electrical sensors and electrical actuators without the need for moving parts. This is because ...
  • The impact of the COVID-19 pandemic on the financial education of primary school students 
    SABĂU, Lidia (Technical University of Moldova, 2022)
    The global COVID-19 pandemic of 2020 has exposed both the underdevelopment of education systems around the world and the level of financial literacy – both of the population and students. This aspect brought back to the ...
  • Non-linguistic Thinking as an Effective Tool for Innovation in Education 
    BRÂNZAN, Leon (Technical University of Moldova, 2022)
    In higher education subjects are traditionally taught in the form of lectures, where teachers are required by the curriculum to cover a certain amount of content in order to prepare their students for subsequent courses ...
  • Exploring PBL as a New Learning Context in Engineering Education 
    GOGOI, Elena (Technical University of Moldova, 2022)
    This paper explores the experience of engineering students in an innovative context, namely, Problem-Based Learning (PBL). It first describes some particular details of PBL framework implementation at the BSc Degree in ...
  • Improving the Informatics Competencies Through Assessment for Learning 
    GUTU, Maria (Technical University of Moldova, 2022)
    This paper presents the impact of the assessment for learning on students' Informatics competencies. The paper has described the usage, advantages and disadvantages of the assessment for learning as self-assessment, peer ...
  • Comprehension, Possibility and Death. The Justification of the Ontological Understanding of Death 
    LOZOVANU, Ecaterina; PERCIUN, Andrei; LUPUȘOR, Alexandru (Technical University of Moldova, 2022)
    If death is revealed to us, in our human experience, as a certainty, one of the decisive questions of explaining our human condition aims at questioning and justifying this certainty. One of the authors who tackles this ...
  • Implementation of dual education at Technical University of Moldova 
    SUDACEVSCHI, Viorica; BUGAIAN, Larisa; CIORBĂ, Dumitru; FIODOROV, Ion; COJUHARI, Irina; MUNTEANU, Silvia (Technical University of Moldova, 2022)
    The article analyses the implementation of the dual study model for higher education at the Technical University of Moldova. This goal was one of the basic ones within the Erasmus+ COOPERA project "Integrating Dual Higher ...
  • EdTech: Concept And Connections 
    BURLACU, Natalia (Technical University of Moldova, 2022)
    The present article turns out to be theoretical research in the field of Educational Sciences with an emphasis on educational technologies widely used in general didactic; and also specific didactics as instruments of ...

Search DSpace


Browse

My Account