Browsing 2019 by Title

Sort by: Order: Results:

  • The algorithm, the software and the methodology of stress tolerance assessment 
    OSIPOVICH, V. S.; RADNYNOK, A. L.; BYCHEK, M. N.; MELNIKOVA, E. A.; SHCHERBINA, N. V.; YAKOVENKO, R. Yu.; YASHIN, K. D. (Technical University of Moldova, 2019)
    The paper deals with the research results of relation between stress resistance level and attention parameters influenced by visual factor of stress. Within the study there was used a modified Landolt ring correction test ...
  • Analysis of modern computer technologies used for virtual fitting of clothes 
    PASHKEVYCH, Kalina; LAVRENKO, Maryna; GERASYMENKO, Olena (Technical University of Moldova, 2019)
    The aim of the research is to analyze modern services used for online selection of clothes of the desired size, and to determine the effective ways of their implementation. A comparative analysis of functional services on ...
  • Antimicrobial properties of berry powders in cream cheese 
    STURZA, Rodica; SANDULACHI, Elisaveta; COJOCARI, Daniela; BALAN, Greta; POPESCU, Liliana; GHENDOV-MOŞANU, Aliona (Technical University of Moldova, 2019)
    This study aims to evaluate the efficiency in reducing pathogens using berry powders in a cream cheese recipe, as compared to the traditional method of manufacturing. This article presents a review of the microbiological ...
  • Application of pareto principle in monitoring walnuts quality at storage 
    SANDULACHI, Elisaveta; BOAGHI, Eugenia; TATAROV, Pavel; RESITCA, Vladislav (Technical University of Moldova, 2019)
    This paper presents two case studies of walnut quality assessment at room temperature storage of 20 ± 20C. The conformity of the Juglans regia L. walnuts, the Calarasi variety, (harvest 2015) and Cogalniceanu variety ...
  • Application of the finite difference method to calculation of dynamic processes in long electrical lines 
    BERZAN, Vladimir (Technical University of Moldova, 2019)
    The electrical circuit structure includes components with concentrated and distributed parameters. This creates difficulties in analyzing the dynamic processes, which are described by differential equations, including those ...
  • Arduino and bluetooth based low cost prototype model for systematic floor cleaning 
    MOHAPATRA, Badri Narayan; DHERANGE, Omkar; BHAMARE, Akshay; DESHMUKH, Pritesh (Technical University of Moldova, 2019)
    Germs will start their work once there is any kind of dust. In order to make the residence as well as industry floors dustless this paper explores the functioning method of a floor cleaner which significantly keeps healthy ...
  • Biologically active substances from Linaria Genistifolia (L.) Mill and their potential usage in the ecological agriculture 
    GUREV, Angela; MASHCENKO, Natalia; BOROVSKAIA, Ala; SHUBINA, Victoria (Technical University of Moldova, 2019)
    The article starts with literature review on secondary metabolites, namely the iridoids contained in Linaria species (Scrophulariaceae). It describes the biological activity of the iridoid glycosides; the importance and ...
  • Calculation the service waiting probability with self-similar network traffic 
    LOZHKOVSKYI, Anatolii (Technical University of Moldova, 2019)
    Calculation of the service quality characteristics in a single-channel system with queue for the packet network is often reduced to the determination of the Hurst exponent for self-similar traffic, after which using the ...
  • Changes in consumer properties of new grain crispbreads based on spelt during storage 
    MARDAR, Maryna; ZNACHEK, Rafaela; MACARI, Artur (Tehnica UTM, 2019)
    The changes that occur with the organoleptic, physicochemical, and microbiological performance of new grain crispbreads based on spelt with the inclusion of enriching supplements in the process of storage. Types of packing, ...
  • Characterization of some apportionment methods 
    BOLUN, Ion (Technical University of Moldova, 2019)
    In this work known main characteristics of 11 apportionment methods are systemized, including the Hondt, Hamilton, Sainte-Laguë and Huntington-Hill methods, and some new ones are determined by computer simulation. To such ...
  • Classical and modern kinematic analysis applied for mechanism study 
    MALCOCI, Iulian; GUŢU, Marin (Tehnica UTM, 2019)
    Mechanism kinematic analysis is usually used for motion study or for simulating and analyzing the movement of mechanical assemblies and the whole mechanism. In this paper we will consider kinematical analysis regarding the ...
  • Comparative analysis of methods of calculation in transient and wave processes in electric circuits 
    BERZAN, Vladimir (Technical University of Moldova, 2019)
    The problem of calculating the transient and wave processes in the circuits with the concentrated and distributed parameters is examined. A comparative-qualitative analysis of the analytical and numerical methods used for ...
  • Comparative analysis of variable refrigerant flow systems and chiller-fan coil system for office buildings 
    GUŢUL, Vera I.; COLDA, Iolanda; GUŢUL, Vera G.; USTUROI, Liubovi (Technical University of Moldova, 2019)
    The paper is dedicated to the technical and economic analysis of air-conditioning solutions for office buildings. În this paper two air conditioning systems were compared: the variable refrigerant flow (VRF) system and the ...
  • Constantin Buşilă - the founder of the Romanian Institute of Energy 
    MANOLEA, Gheorghe (Technical University of Moldova, 2019)
    The lives of some people start in conditions remembered by history, adverse for some. These people, at least some of them, fight against the vicissitudes of life and they win. Some of them dedicate their energy to the other ...
  • Developing tailored clothing for children with special needs 
    DANILA, Victoria (Tehnica UTM, 2019)
    This article provides an analysis of the development clothing systems effectiveness that are tailored to preventive interventions for premature babies. An analysis of the conducted clinical trials has been framed in a ...
  • Emerging technologies: 5G and IoT 
    BĂJENESCU, Titu-Marius I. (Technical University of Moldova, 2019)
    The fifth generation mobile network 5G is a set of emerging global telecommunications standards, generally using high-frequency spectrum, to offer network connectivity with reduced latency and greater speed and capacity ...
  • Estimation of athlete coordination abilities based on the reproducibility analysis of the electromyographic patterns of complex coordination movements 
    DAVYDOVA, Nadezhda; VASIUK, Valery; OSIPOV, Anatoly; MIKHUTA, Igor; KHOKHOLKO, Anna; MEZHENNAYA, Marina; DAVYDOV, Maksim (Technical University of Moldova, 2019)
    Coordination abilities are the integral components in estimation of an athlete's physical preparedness and movement capabilities. The paper describes an original approach to the estimation of athletes coordination abilities ...
  • Factors that determine the shelf life of a butter-like spread based on walnut oil 
    RADU, Oxana; BAERLE, Alexei; TATAROV, Pavel; POPESCU, Liliana (Technical University of Moldova, 2019)
    The article describes the manufacturing stages for a new functional product that can enrich human diet with essential lipids – spread based on walnut oil. Due to the fact that its content of polyunsaturated fatty acids is ...
  • Future trends in power electronic devices 
    BĂJENESCU, Titu-Marius I. (Technical University of Moldova, 2019)
    The recent technological progress of semiconductors and increasing demand for power electronic devices in the different domains of electric energy particularly for applications in aeronautics and networks of transport and ...
  • A fuzzy logic approach for mathematical modeling of the extraction process of bioactive compounds 
    GHENDOV-MOŞANU, Aliona; STURZA, Rodica; CHERECHEŞ, Tudor; PATRAS, Antoanela (Technical University of Moldova, 2019)
    The aim of the present study was to optimize the extraction process of bioactive compounds from berries and wastes from the agro-food industry (grape marc).Mathematical models of the extraction process of biologically ...

Search DSpace


Browse

My Account