IRTUM – Institutional Repository of the Technical University of Moldova

Browsing Conferinţa ICNBME - International Conference on Nanotechnologies and Biomedical Engineering by Title

Browsing Conferinţa ICNBME - International Conference on Nanotechnologies and Biomedical Engineering by Title

Sort by: Order: Results:

  • 2D Materials Nanotechnologies Between Great Expectations and Lost Illusions 
    DRAGOMAN, Mircea (Tehnica UTM, 2015)
    This talk will be a review of the state of the art of 2D materials starting with graphene. The graphene discovery and latter of other 2D materials have produced a revolution in nanotechnology. New physical phenomena were ...
  • 2D materials nanotechnologies between great expectations and lost illusions 
    DRAGOMAN, Mircea (Technical University of Moldova, 2015)
    This talk will be a review of the state of the art of 2D materials starting with graphene. The graphene discovery and latter of other 2D materials have produced a revolution in nanotechnology. New physical phenomena were ...
  • 2D semiconductor-metal quasi-periodic structures for photonics 
    MONAICO, Eduard (Technical University of Moldova, 2015)
    We report on fabrication of metal nanotubes in semiconductor nanotemplates possessing ordered two-dimensional hexagonal arrays of pores grown in semiconductor substrates using anodic etching in neutral electrolyte.
  • 3D Nanoarchitectures – a Novel Class of Materials: Perspective for Sustainable Development 
    FOMIN, Vladimir M. (Universitatea Tehnică a Moldovei, 2023)
    Extending nanostructures into the third dimension has become a vibrant research avenue in condensed-matter physics, because of geometry- and topology-induced phenomena. Modern advances of high-tech fabrication techniques ...
  • 3D-Printed Sensor Array of Semiconducting Oxides 
    SIEBERT, L.; TERASA, M. I.; ABABII, N.; LUPAN, O.; ADELUNG, R. (Tehnica UTM, 2019)
    Sensors start to play an ever increasing role in human life and new technologies for their cost-effective mass production are required. In this work, the one-step 3D-printing of nanoflakes - nanowire covered Fe2O3/Fe - ...
  • 3D-Printed Sensors of Nanostructured Semiconducting Oxides 
    LUPAN, Oleg (Universitatea Tehnică a Moldovei, 2021)
    3D printed sensors will play an important role in the world of modern devices and are crucial nowadays due to complexity of mounting on various equipment for the development of biomedical or monitoring systems. Mixing ...
  • 4-Quadrant interpretation of the Speed Spot Plot Asymmetry for Arrhythmia Detection 
    SOKOL, Y.I.; SHYSHKIN, M.A.; BUTOVA, O.A.; AKHIIEZER, O.B.; DUNAIEVSKA, O.I. (Universitatea Tehnică a Moldovei, 2021)
    Today, The World Health Organization estimates that by 2030, about 25 million people will die from cardiovascular disease every year, meaning that heart disease will remain the leading cause of death. One of the most common ...
  • 5th International conference on Nanotechnologies and Biomedical Engineering ICNBE-2021. Program and Abstract Book 
    Technical University of Moldova; Moldavian Society of Biomedical Engineering; SONTEA, Victor; TIGINYANU, Ion; RAILEAN, Serghei (Universitatea Tehnică a Moldovei, 2021)
    ICNBME-2021 continues the series of International Conferences in the field of nanotechnologies and biomedical engineering. The conference aims at bringing together scientists and engineers dealing with fundamental and ...
  • 6th International conference on Nanotechnologies and Biomedical Engineering ICNBE-2023. Abstract Book 
    Technical University of Moldova; Moldavian Society of Biomedical Engineering; SONTEA, Victor; TIGINYANU, Ion; RAILEAN, Serghei (Technical University of Moldova, 2023)
    The conference covers a wide range of subjects of primary importance for research and development such as nanotechnologies and nanomaterials; bio-micro/nano technologies and devices, biomaterials for medical applications, ...
  • About the Using of Polarization Methods in Investigating the Polarization Sensitive Nanosystems 
    ZENKOVA, C.Yu.; SOLTYS, I. V. (Technical University of Moldova, 2011)
    The paper shows the possibilities of defining the degree of correlation of mutually orthogonal superposing circularly-polarized and linearly-polarized plane waves. The proposed results widen possibilities of metrological ...
  • Accuracy Analysis of Measurements in Electrochemical Biosensing 
    MAKIEWICZ, P.; MATIAS, D.; JASKUŁA, M.; BIEGUN, M.; PENKALA, K.; MIJOWSKA, E.; El FRAY, M.; PODOLSKI, J. (Tehnica UTM, 2015)
    In the paper the results of research on accuracy analysis of measurements in electrochemical biosensing are presented. The scope of performed tests includes EIS (Electrochemical Impedance Spectroscopy) and chronoamperometry, ...
  • Acetone Sensing Properties of Nanostructured Copper Oxide Films on Glass Substrate 
    CRETU, V.; ABABII, N.; POSTICA, V.; MAGARIU, N.; HOPPE, M.; VERJBITKI, V.; SONTEA, V.; ADELUNG, R.; LUPAN, O. (Tehnica UTM, 2019)
    Copper oxide nanostructured films were synthesized via a chemical synthesis (SCS) method and annealed in low vacuum. The morphological properties were investigated using scanning electron microscopy (SEM). The elaborated ...
  • Acid Corrosion Inhibitor from Tobacco Waste for Steel of Oil Pipes 
    MIRGOROD, Yu. A.; STOROZHENKO, A. M.; CONDREA, E. P. (Tehnica UTM, 2019)
    A technology of an acid corrosion inhibitor production for steel of oil pipes has been developed. The inhibitor is obtained by extracting nicotine and related substances with an aqueous solution of benzoic acid from tobacco ...
  • Activation Process of GaAs NEA Photocathode and its Spectral Sensitivity 
    MITSUNO, K.; MASUZAWA, T.; HATANAKA, Y.; NEO, Y.; MIMURA, H. (Tehnica UTM, 2015)
    Negative electron affinity (NEA) Gallium Arsenide (GaAs) photocathodes with high photo-electric conversion quantum efficiency (QE) and high response speed are expected as an electron source for THz frequency vacuum devices. ...
  • Active and Passive Electronics for Smart Implants 
    MAKAROV, Denys (Tehnica UTM, 2015)
    We developed flexible, printable, stretchable and even imperceptible large area passive electronic components with the specific focus on magnetosensitive elements, which were completely missing in the family of flexible ...
  • Active Bioresonance Therapy Device 
    SECRIERU, Vitalie; MUNTEANU, Eugen; BALICA, Ştefan; DOROGAN, Andrei; VIERU, Stanislav; VIERU, Tatiana; DOROGAN, Valerian (Technical University of Moldova, 2013)
    At the moment studies had proved that a lot of actual and well known diseases are conditioned by the presence of parasites of different etiology in human body. The present paper describes a device elaborated and manufactured ...
  • Active Spectral Absorption Control in a Tunable Liquid Crystal/Metamaterial Structure by Polarization Plane Rotation 
    BĂRAR, A.; DĂNILĂ, O.; MĂNĂILĂ-MAXIMEAN, D.; LOIKO, V. A. (Tehnica UTM, 2019)
    We present theoretical studies conducted on the newly-introduced controllable metamaterial-liquid crystal system. Our model consists of a standard metamaterial single cell split ring resonator array with dimensions tailored ...
  • Activities in Nanomedicine in Romania 
    DASCALU, Dan (Technical University of Moldova, 2011)
    IMT-Bucharest coordinated the national project ―”NANOPROSPECT: Nanotechnologies in Romania, a prospective study” (October 2010 – May 2011), whose objective was to put forward strategic orientations and recommendations for ...
  • Adsorption of gold nanoparticle multilayers 
    BUBNIENĖ, U.; BALEVIČIUS, Z.; RAMANAVIČIENĖ, A.; BUGELYTĖ, B.; RAMANAVIČIUS, A. (Tehnica UTM, 2013)
    Gold nanoparticles are the subject of prosperous research, with vast applications in the interdisciplinary areas. When preparing the surface nanocomposites the first stage is the adsorption process and this procedure has ...
  • Adsorption of Lead Ions on Carbonaceous Sorbents of Nutshell Obtained from Secondary Raw Material 
    MARSAGISHVILI, T.; TATISHVILI, G.; ANANIASHVILI, N.; GIORGADZE, N.; TSKHAKAIA, E.; GACHECHILADZE, M.; METREVELI, J.; MACHAVARIANI, M. (Tehnica UTM, 2019)
    The sorption of Pb (II) ions from an aqueous solution of lead nitrate on carbon sorbents, obtained from waste based on cellulose-containing materials, was studied. Particularly, among studied carbons [hazel nutshell, walnut ...

Search DSpace


Browse

My Account