Nr. 4

Browse by

CONTENT

Author	Title	Page
HERLEA A.	The history of technology and the European Unity	13
BĂJENESCU Titu-Marius I.	Some reliability problems of electronic packages	22
LVOVSKY E. LVOVSKY N.	The specified rating of the countries’ population well –being all over the world	32
DEREVJANKO V. N. NECHITAYLO N. P.	Factors leading to a decrease in membrane permeability for water filtration and wastewater	40
V. DEKANSKIY V. ZAVIALOV V. BODROV T. MISYURA Y. ZAPOROZHETS N. POPOVA	Flowsheet of malt extracts productionusing maltings of cereals and legumes	43
POPOVICI C. TATAROV P.	Evolution of fatty acids and peroxydes content in walnut oil (Juglans regia L.) during storage	46
CHIRICUŢĂ I. RUSU I.	Improving the properties of fly ash by mixing with different substances	51
COSOVSCHI P.	Presentation of results for surface plastic deformation by laminar graphite cast iron	54
MARINA V. MARINA Viorica	Methodology of matrix representation of higher order tensors	57
GROSU C.	Walnut (Juglans regia L.) halva	61
EVDOCHIMOV R.	Various online resources for developing interactive teaching materials used in teaching-learning-evaluation with interactive whiteboard	64
ZUBRILINA Ya. LUPASHKU T.	New effective technologies of production of building materials and articles	67
LEONTE P. PLEŞCA A.	Harmonic analysis at power rectifiers	70
BOSTAN I. BOSTAN V. DULGHERU V. CIOBANU O.	Micro-hydropower station for kinetic energy conversion of flowing whater with modified hydrodynamic rotor	75
MOCANU F. BEJAN L.	Treatments of composite materials surfaces for adhesive bonding	81
LUNGULEASA A.	Water absorbtion and wood swelling for spruce after total imersion	87
DECHER E. RUJANU M.	Use of polymer composite materials in the building industry	90
DULGHERU Valeriu	The psychology of creativity	93
MANOLEA Gheorghe	Personalities from the meridians of the engineering universe	97

Recent Submissions

Personalities from the meridians of the engineering universe

MANOLEA, Gheorghe (Technical University of Moldova, 2014)
The psychology of creativity

DULGHERU, Valeriu (Technical University of Moldova, 2014)
Use of polymer composite materials in the building industry

DECHER, E.; RUJANU, M. (Technical University of Moldova, 2014)

The appearance of modern composites revolutionized the materials of construction domain by their production’s ingeniouzity, the net superior physico-mechanical properties in comparison with the traditional materials and ...
Water absorbtion and wood swelling for spruce after total imersion

LUNGULEASA, A. (Technical University of Moldova, 2014)

This work-paper presents some aspect referring to dynamic of water absorption and wood swelling for spruce specie. Based on classical methods of research this work-paper tries to find original things about wood swelling ...
Treatments of composite materials surfaces for adhesive bonding

MOCANU, F.; BEJAN, L. (Technical University of Moldova, 2014)

The present paper discusses in detail mechanical, energetic and chemical treatments of composite material surfaces for adhesive bonding.
Micro-hydropower station for kinetic energy conversion of flowing whater with modified hydrodynamic rotor

BOSTAN, I.; BOSTAN, V.; DULGHERU, V.; CIOBANU, O. (Technical University of Moldova, 2014)

Increased efficiency of elaborated micro-hydropower stations is achieved by an optimum position of the blades with hydrodynamic profile. The formulation used to compute the hydrodynamic forces is an inviscid –boundary layer ...
Harmonic analysis at power rectifiers

LEONTE, P.; PLEŞCA, A. (Technical University of Moldova, 2014)

The derivation of the harmonic currents produced by static power converters requires accurate information of the AC voltage waveforms at the converter terminals, converter configuration, type of control, AC system impedance ...
New effective technologies of production of building materials and articles

ZUBRILINA, Ya.; LUPASHKU, T.; SHAMIS, E. (Technical University of Moldova, 2014)

The work includes the summary data of new technologies of building materials and articles on basis of mineral bindings. The methods are tested in manufacturing environments on gypsum and gypsum-port land cement-active ...
Various online resources for developing interactive teaching materials used in teaching-learning-evaluation with interactive whiteboard

EVDOCHIMOV, R. (Technical University of Moldova, 2014)

Diversification of methods of teaching-learning-evaluation has a beneficial effect on the learner. Recently has appeared a new method of teaching, learning and evaluation with interactive whiteboard. The appearance of new ...
Walnut (Juglans regia L.) halva

GROSU, C. (Technical University of Moldova, 2014)

It was studied the obtaining process of walnut halva (Juglans Regia L). As raw materials for the halva preparation served partially defatted Cogălniceanu walnut kernel, sugar and water. The result of the research is to ...
Methodology of matrix representation of higher order tensors

MARINA, V.; MARINA, Viorica (Technical University of Moldova, 2014)

The governing nonlinear equations of anisotropic materials are examined in reversible deformation area. The constitutive equations of the second order, in which the tensors of elastic constants of forth order listed, are ...
Presentation of results for surface plastic deformation by laminar graphite cast iron

COSOVSCHI, P. (Technical University of Moldova, 2014)

In the publication is presented experimental data for surface deformation of cast iron with lamellar graphite, obtained using modern equipment and describing the processes for this treatment. The obtained results allow to ...
Improving the properties of fly ash by mixing with different substances

CHIRICUŢĂ, I.; RUSU, I. (Technical University of Moldova, 2014)

Fly ash (FA) are widely used throughout the world in concrete mixtures type road structures. Binders can be added to significantly improve the properties of FA. Even a very small addition of binder (1 – 2%) in a FA may ...
Evolution of fatty acids and peroxydes content in walnut oil (Juglans regia L.) during storage

POPOVICI, C.; TATAROV, P. (Technical University of Moldova, 2014)

Walnut is a crop of a high economic interest for the food industry. A major goal in walnut production is to find an appropriate method to stabilize lipids from walnut kernels. The aim of the work was to evaluate the influence ...
Factors leading to a decrease in membrane permeability for water filtration and wastewater

DEREVJANKO, V. N.; NECHITAYLO, N. P. (Technical University of Moldova, 2014)

This work analyses factors that lead to fouling of membrane elements during operation. Membranes are subject to fouling with colloidal particles, inorganic, organic and biological organisms. This article provides a critical ...
The specified rating of the countries’ population well –being all over the world

LVOVSKY, E.; LVOVSKY, N. (Technical University of Moldova, 2014)

The authors have found in the Internet [1] the rating of countries on the average well – being of the population. We have made an attempt to specify this rating using powerful statistical program packets. The obtained ...
Some reliability problems of electronic packages

BĂJENESCU, Titu-Marius I. (Technical University of Moldova, 2014)

After a subject introduction, some of the most important reliability problems of electronic plastic packages are presented. The paper, intended to inform the nonspecialists and decision makers, explores different packaging ...
The history of technology and the European Unity

HERLEA, A. (Technical University of Moldova, 2014)

This paper sets into parallel lines the birth and the evolution, in Europe, of a discipline—the History of Technology—and that of an idea which leads to the construction of the European Union. It shows the dependence of ...

Nr. 4

Nr. 4

Browse by

CONTENT

Recent Submissions

Search DSpace

Browse

All of DSpace

This Collection

My Account

Discover

Author

Subject

Date Issued

Has File(s)

RSS Feeds