International Conference on Electronics, Communications and Computing (IC|ECCO): Recent submissions

  • Stochastic optimal control of a two-dimensional dynamical system 
    LEFEBVRE, Mario (Tehnica UTM, 2019)
    In this paper, exact and explicit solutions will be found in particular cases by making use of the method of similarity solutions to solve the partial differential equation satisfied by the value function.
  • Automatic control system for crop cultivation 
    FIODOROV, Ion; COJUHARI, Irina; IZVOREANU, Bartolomeu; MORARU, Dumitru; BALABAN, Eugeniu (Tehnica UTM, 2019)
    Nowadays, greenhouses are widely used, they permit to exclude the influence of climatic factors and to ensure a stable crop of fresh vegetables. For the large scale in the greenhouses is used the automation, that suppose ...
  • Synthesis of the auto-tuned pid controller to the inertial object 
    BALABANOV, Anatolii; IZVOREANU, Bartolomeu; POTLOG, Mihail; FIODOROV, Ion; COJUHARI, Irina; MORARU, Dumitru (Tehnica UTM, 2019)
    In the paper, it was developed the mechanism for adaptation of the transfer coefficient of PID controller to the model of object with inertia first order and time delay; schema for simulation of the control system with ...
  • Virtual classroom in the digital age: concept, product and applicability 
    BURLACU, Natalia (Tehnica UTM, 2019)
    Given paper presents itself as a descriptive ascertaining study that comes with the analysis of the phenomenon of virtual classrooms' using at the different educational levels and / or in the different educational situations ...
  • Information technologies as a means of activating the training activity 
    PAXIMADI, Elena (Tehnica UTM, 2019)
    New information technology in education is a pedagogical technology that uses special means of programming and technical (film, audio, video means, computers and networks) telecommunications) for information activity.
  • The theory of inventive problem solving 
    MAFTEI, Vitalie (Tehnica UTM, 2019)
    A modern engineer should have a fairly serious set of system competencies. Today, in the qualification of an engineer, knowledge and skills in ensuring the relations of production with the market are valued, in the future ...
  • The role of humanitarian disciplines for engineers 
    LUNGU, Viorelia (Tehnica UTM, 2019)
    The mission of the university, in the Knowledge Society, is to produce, capitalize and transmit knowledge in order to adapt to the current demands and challenges of the society, but also to establish the competences necessary ...
  • Mentoring engineering students 
    GOGOI, Elena (Tehnica UTM, 2019)
    Today successful teaching is not about holding and sending information to students, neither is efficient learning about passively processing and memorizing significant amounts of text in order to get higher test scores. ...
  • Computer ethics – problems and solutions 
    LOZOVANU, Ecaterina (Tehnica UTM, 2019)
    In the last decades of the 20th century, since computer technologies have become part of many aspects of daily life, in the specialized literature more and more insistent were promoted the ideas, which supported the existence ...
  • The beneficial effects of e-Governance for moldovan society 
    LAZARIUC, Cristina (Tehnica UTM, 2019)
    The changes that take place in the information society determine the consolidation of a new type of social relations and also of a new legal framework that is regulating the interaction between citizens and their ...
  • Determination of the charge carrier system parameters in Pb0.82Sn0.18Te 
    MEGLEI, D.; ALEKSEEVA, S. (Tehnica UTM, 2019)
    The temperature dependences of electrical conductivity (σ), Hall coefficient (R), thermopower (α), and Nernst-Ettingshausen coefficient (Q) for five Pb0.82Sn0.18Te samples with different charge carrier concentrations in a ...
  • Adaptive computing architectures for real-time applications 
    ABABII, Constantin; MUNTEANU, Silvia; MELNIC, Radu; OSOVSCHI, Mariana; BORDIAN, Dimitri (Tehnica UTM, 2019)
    Computing systems, which are based only on the technological concept, have already entered in a development deadlock. An alternative development direction of the computing systems is offered by the adaptive computing ...
  • Hardware-software complex for defining the Critical Flicker Fusion Frequency (CFSM) using Raspberry PI 
    ROMANENKO, Alexandr; DUCA, Ludmila; BRANISTE, Rodica (Tehnica UTM, 2019)
    In this work, it is considered a device for determining the critical fusion frequency of light flickers (CFSM), implemented using a single-board computer Raspberry PI. CFSM is a function of light and distinctive sensitivity ...
  • Developed and implemented the programmer for AVR and PIC microcontrollers, based on PIC32MX microcontroller through SPI + DMA 
    POPA, Victor (Tehnica UTM, 2019)
    The purpose of this study is to develop an embedded system , that will have the role of programmer for different microcontrollers from the AVR and PIC family.
  • Cognitive computing system based on distributed knowledge 
    SUDACEVSCHI, Viorica; MUNTEANU, Silvia; ABABII, Victor; BRANISTE, Rodica; BOROZAN, Olesea; ALEXEI, Victoria (Tehnica UTM, 2019)
    In the current paper the results of research and development of a computational system with cognitive properties based on inhomogeneous knowledge distributed by a set of Intelligent Agents are presented.
  • Parallel computing for multi-dimensional signals acquisition and processing 
    CALUGARI, Dmitri; ABABII, Constantin; OSOVSCHI, Mariana; TURCAN, Ana; BORDIAN, Dimitri; BOROZAN, Olesea (Tehnica UTM, 2019)
    This paper presents the design and research results of the digital systems with parallel computing for the acquisition and processing of multi-dimensional signals The obtained results can be applied to solve the problem ...
  • The PBL model implementation within the Software Engineering Study Program 
    CIORBĂ, Dumitru; COJUHARI, Irina (Tehnica UTM, 2019)
    PBL (Problem Based Learning) is the learning philosophy that involves students in finding problems and identifying solutions to overcome them. There is no one PBL model suitable for all purposes. However, the PBL-based ...
  • Estimation of parameters of a received signal in a single-frecquency network DVB-T2 
    IACOB, Mihail I.; DEMCIUC, Yurie I.; AVRAM, Ion A. (Tehnica UTM, 2019)
    The second-generation digital terrestrial television broadcasting system DVB-T2 [1] provides greater flexibility and spectral efficiency of the system compared to its predecessor DVB-T, and is most focused on the deployment ...
  • Particularities of the implementation of terrestrial digital television in the Republic of Moldova 
    IACOB, Mihail I.; DEMCIUC, Yurie I.; AVRAM, Ion A. (Tehnica UTM, 2019)
    In accordance with the provisions of the Regional Agreement on the Planning of Digital Broadcasting Services (ITU-R Conference, Geneva, 2006), starting from 17 June 2015, the Republic of Moldova assumed the obligation to ...
  • Elaboration of a training system and algorithm to improve batteries performance 
    TINCOVAN, Serghei (Tehnica UTM, 2019)
    In the process of battery operation, an important factor is the identity of the individual elements characteristics, on which the lifetime of the entire battery depends. In charge-discharge cycles, an element with worse ...

Search DSpace


Advanced Search

Browse

My Account