DSpace Repository

Browsing 2012 by Title

Browsing 2012 by Title

Sort by: Order: Results:

  • CRUDU, R. (Technical University of Moldova, 2012)
    The paper relates to the design and modeling procedure of the wound spars made of fibrereinforced composites that are typical for small Aeolian rotor blades of our days. The calculus is conducted on the basis of longitudinal ...
  • NICOLAESCU, A. (Technical University of Moldova, 2012)
    This study has been made on the basis of a multi-annual data set (2006-2011) from five grape processing factories from Straseni district and it approaches the main directions to maintain the financial equilibrium and focuses ...
  • CAŢARSCHI, V. (Technical University of Moldova, 2012)
    The stresses built up in ingot and semi-finished products during their thermal working. Are part of the basic factors that limit the heating or cooling rate as well as the destructing phenomenon of the metal compactness. ...
  • SANDULACHI, E. (Editura U.T.M., 2012)
    În această lucrare se prezintă evaluarea, în baza studiului bibliografic, a proprietăţilor fizico-chimice a enzimelor pectolitice utilizate la fabricarea sucurilor de fructe şi legume. Sunt argumentaţi factorii ce determină ...
  • ANDRIUŢĂ, M.; SÂRBU, T.; URSU, V.; VANGHELI, M. (Editura U.T.M., 2012)
    Se prezintă rezultatele analizei matematice a informaţiei experimentale publicate, care a permis rezolvarea chestiunilor disputabile privind unele legităţi importante ale procesului de tăiere a solului cu maşinile de terasamente.
  • SIMINIUC, R. (Technical University of Moldova, 2012)
    This paper contains general concepts related to the incidence of celiac disease in the world and in Republic of Moldova and the problems faced in our country celiacs.
  • SECRIERU, V.; ZAPOROJAN, S.; DOROGAN, V. (Editura U.T.M., 2012)
    În lucrare este dezvoltat un model al costurilor sistemelor încorporate. Costul sistemului este definit în termenii unor parametri, care includ parametri fizici, cum ar fi aria capsulei circuitului integrat, numărul de ...
  • PALAMARCIUC, L.; SCLIFOS, A.; ARHIP, V.; ŞTEFĂNEŢ, R. (Editura U.T.M., 2012)
    În această lucrare au fost cercetate spectrele de absorbţie prin metoda spectrofotometrică a extractelor hidro-alcoolice din pelin şi cimbrişor. Au fost stabilite valorile maximale de absorbţie la lungimile de undă 320-350 ...
  • IVANOVA, R.; TATAROV, P.; CASIAN, I. (Technical University of Moldova, 2012)
    The objective of this research was studying the stability of fruit extracts during storage at 5±1oC by determining in vitro their capacity to scavenge peroxyl radicals. The antioxidant capacity of obtained fruit extracts ...
  • MARTIROSYAN, V.; TOROSYAN, G.; SASUNTSYAN, M.; TOROSYAN, N. (Technical University of Moldova, 2012)
    We developed an innovative technology for processing metal complex chromites Sevan to produce chromium metal in SHS regime. In this case, we studied the increased reactivity of chromite concentrates (for the content of 53% ...
  • GORNEŢ, V. (Editura U.T.M., 2012)
    Elaborarea reţetelor şi aprofundarea tehnologiei produselor din ficat în formă pentru două produse în condiţii industriale. Produsele din ficat în formă după finisarea procesului tehnologic au fost supuse unei analize de ...
  • VASCAN, G. (Technical University of Moldova, 2012)
    The goal of this paper is to address the performance requirements for constructions, in order to satisfy the needs of consumers for the whole life cycle of construction, in line with the social and economic requirements. ...
  • SANDULACHI, E.; GORNEŢ, V. (Technical University of Moldova, 2012)
    This paper present the evaluation, based on bibliographic and experimental study of the nutritional value of meat and liver of bovines/porcinis. Was studied the chemical composition and nutritional value of raw materials.Nutrition ...
  • SECRIERU, V.; ZAPOROJAN, S.; DOROGAN, V. (Technical University of Moldova, 2012)
    The paper concentrates on the cost-performance analysis of embedded systems. Designers of embedded systems need to understand different chips, their capabilities, and their architectures before creating the design. Hardware ...
  • ANDRIUŢĂ, M.; BELEUŢA, V. (Editura U.T.M., 2012)
    Se prezintă rezultatele cercetărilor exercitate în scopul elaborării metodei operative de apreciere a săgeţii iniţiale de încovoiere a turnului macaralei. S-a analizat cazul prinderii turnului la edificiu cu două ancoraje.
  • GUŢU, V. (Technical University of Moldova, 2012)
    This paper prezents a comparative analysis of selection devices signals by frequency, analog and digital, in terms of their own electronic noise. Pull a conclsion that numerical filters, providing a higher degree of ...
  • IOVE (MUSTEAŢĂ), V. (Technical University of Moldova, 2012)
    The paper aims to present the perceptions held by the countries when they joined the Eastern Partnership along with the European Union and compare them to the actual results achieved during the three years of collaboration. ...
  • IGNAT, V. (Editura U.T.M., 2012)
    Prezenta lucrare este dedicată evaluării eficienţei economice a cheltuielilor perioadei în întreprinderile agricole în baza S.R.L. „Regis Agro”, raionul Făleşti. În acest context sunt analizate structura cheltuielilor ...
  • OPREA, D. (Technical University of Moldova, 2012)
    The Czech electricity market was fully liberalised on 1 January 2006, when the last remaining customer category, households, became eligible to choose their supplier. Average gas and electricity prices for all customer ...
  • PORCESCU, G. (Editura U.T.M., 2012)
    Energia devine din ce în ce mai scumpă, iar producția ei în baza tehnologiilor tradiționale accentuează dezastrul ecologic distrugând echilibrul climatic global. Tipurile predominante de energii regenerabile utilizate ...

Search DSpace


Advanced Search

Browse

My Account