DSpace Repository

Aprecierea uzării cuplei de frecare disc - cilindru la temperatură constantă

Show simple item record

dc.contributor.author VASIU, T.
dc.contributor.author MAKSAY, Şt.
dc.date.accessioned 2019-08-28T10:14:39Z
dc.date.available 2019-08-28T10:14:39Z
dc.date.issued 2003
dc.identifier.citation VASIU, T., MAKSAY, Şt. Aprecierea uzării cuplei de frecare disc - cilindru la temperatură constantă. In: Meridian Ingineresc. 2003, nr. 1, pp. 50-51. ISSN 1683-853X. en_US
dc.identifier.issn 1683-853X
dc.identifier.uri http://repository.utm.md/handle/5014/4277
dc.description.abstract În lucrare este determinată viteza de uzare a cuplei frecare disc – cilindru, executată din Fc20 şi respectiv OL37. Experimentările s-au făcut la temperatură constantă, iar parametrii independenţi au fost consideraţi viteza relativă în zona de contact şi forţa de frecare corespunzătoare. Concluziile desprinse permit aprecierea normalităţii funcţionării cuplei studiate, iar rezultatele obţinute se pot extinde şi la cuple de frecare similare, care funcţionează în regim uzinal. en_US
dc.description.abstract The paper refers to the estimations we made on the wear rate of disc – cylinder coupling, made of Fc20, respectively OL37. The experiments were carried out at constant temperature and we considered as independent parameters the relative velocity in the contact zone and the corresponding pressing force. The conclusions we draw allow the appreciation of the normal functioning of the coupling under consideration and the results we obtained can be extended to the similar friction couplings, working in industrial conditions. en
dc.description.abstract Dans l’ouvrage, est déterminée la vitesse de l’usage de l’attelage de frottement disque – cylindre, exécuté par Fc20 et respectivement OL37. Les expérimentes ont été faits à température constante et les paramètres indépendants ont été considérés la vitesse relative dans la zone de contact et la force de pression adéquate. Les conclusions obtenues permettent l’appréciation de la normalité du fonctionnement de l’attelage étudié, mais les résultats obtenus peuvent être développés aussi dans le cas des couples d’attelage similaires, qui fonctionnent dans le régime de l’usine. fr
dc.description.abstract В работе определяется скорость износа пары сил трения диск – цилиндр, изготовленные из чугуна Фс20 или стали 3. Эксперименты были проведены при постоянной температуре, а свободные параметры, принятые во внимание, были относительная скорость в контактной зоне и сила трения. Полученные результаты имеют большое значение для заводской практике. ru
dc.language.iso ro en_US
dc.publisher Tehnica-Info en_US
dc.rights Attribution-NonCommercial-NoDerivs 3.0 United States *
dc.rights.uri http://creativecommons.org/licenses/by-nc-nd/3.0/us/ *
dc.subject disc – cylinder coupling en_US
dc.subject wear en_US
dc.subject uzură en_US
dc.subject cuple de frecare disc en_US
dc.title Aprecierea uzării cuplei de frecare disc - cilindru la temperatură constantă en_US
dc.title.alternative Estimation of the wear of the disc – cylinder coupling for a constant temperature en_US
dc.title.alternative L’estimation de l’usage de l’attelage de frottement disque/cylindre à température constante en_US
dc.title.alternative Определение износа пары сил трения диск – цилиндр при постоянной температуре en_US
dc.type Article en_US


Files in this item

The following license files are associated with this item:

This item appears in the following Collection(s)

Show simple item record

Attribution-NonCommercial-NoDerivs 3.0 United States Except where otherwise noted, this item's license is described as Attribution-NonCommercial-NoDerivs 3.0 United States

Search DSpace


Advanced Search

Browse

My Account