Conferinţa ICNBME - International Conference on Nanotechnologies and Biomedical Engineering: Recent submissions

  • Smart Self-healing Eco-friendly Nano and Nano-compozite Protective Coatings 
    MAKHLOUF, Abdel Salam Hamdy (Technical University of Moldova, 2011)
    This paper reports our achievements in designing high performance eco-friendly coatings technologies for light-weight materials through international collaborations with USA, Italy, France, Romania, UK and Germany Aluminum ...
  • Strain-Tunable Quantum Dot Devices 
    RASTELLI, A.; TROTTA, R.; ZALLO, E.; ATKINSON, P.; MAGERL, E.; DING, F.; PLUMHOF, J. D.; KUMAR, S.; DÖRR, K.; SCHMIDT, O.G. (Technical University of Moldova, 2011)
    We introduce a new class of quantum dot-based devices, in which the semiconductor structures are integrated on top of piezoelectric actuators. This combination allows on one hand to study in detail the effects produced by ...
  • Two Simple Examples for the Micro-nano Integration of Nanowires as Electronic Device Elements 
    ADELUNG, Rainer (Technical University of Moldova, 2011)
    As a part of the conference talk about the mass fabrication and applications of nanostructures, the aim of this paper is to review and compare two approaches for the simple fabrication and integration and of nanostructures ...
  • Ballistic Charge Carrier Devices for Terahertz 
    HARTNAGEL, H. L. (Technical University of Moldova, 2011)
    It is of great interest, to produce light-weight Terahertz sources for the many appl ications such as security testing. By reducing the transit distance suitably, the charge carrier can be approximately ballistic, that is ...
  • Investigation of Mesoporous Structures for Thermoelectric Applications 
    COJOCARU, A.; CARSTENSEN, J.; BOOR, J.; SCHMIDT, V.; FÖLL, H. (Technical University of Moldova, 2011)
    Mesoporous silicon is an attractive material for thermoelectric application. For pore wall thicknesses around <100nm, phonons can not penetrate the porous layer while electrons still can, due to there smaller mean free ...
  • The Collaborative Research Center “Magnetoelectric Composites -Future Biomagnetic Interfaces” at the Christian-Albrechts-University in Kiel 
    FÖLL, H. (Technical University of Moldova, 2011)
    In Jan. 2010 the ―Deutsche Forschungsgemeinschaft― (DFG) established a so-called ―Sonderforschungsbereich‖ (Collaborative Research Center) for Research into magnetoelectric composites for future biomagnetic interfaces at ...
  • Porous InP as Piezoelectric Matrix Materialin 1-3 Magnetoelectric Composite Sensors 
    GERNGROSS, M.-D.; LEISNER, M.; CARSTENSEN, J.; FÖLL, H. (Technical University of Moldova, 2011)
    This work shows the results of the fabrication of semi-insulating piezoelectric porous InP structures by electrochemical etching and subsequent purely chemical post–etching in an isotropic HF, HNO3, EtOH and HAc containing ...
  • Monte-Carlo-Simulation of Crystallographical Pore Growth in III-V-Semiconductors 
    LEISNER, Malte; CARSTENSEN, Jürgen; FÖLL, Helmut (Technical University of Moldova, 2011)
    The growth of crystallographical pores in III-V-semiconductors can be understood in the framework of a simple model, which is based on the assumption that the branching of pores is proportional to the current density at ...
  • The Analysis of the Legal Framework in the eHealth Field in Moldova, in the Context of European Integration 
    ROŞIORU, Alexandru (Technical University of Moldova, 2011)
    The analysis of the legal framework in the eHealth field in Moldova, was made in the context of European integration. This study is aimed to identify the legislative and normative gaps in the field of implemetning eHealth ...
  • Information System Analysis of Heart Rate Variability 
    IAVORSCHI, Anatolie; PAHOMI, Valerii; PIRTAC, Valeriu; ANGHILOGLU, Dmitrii; RAILEAN, Serghei; BRAGARENCO, Andrei; SCRIPNIC, Vitalie (Technical University of Moldova, 2011)
    In this work is presented the software for heart rate variability analysis using methods of ECG and FPG signal registration and processing.
  • DLC Biocompatible thin Films for Cardiovascular Implants 
    SHISHIYANU, S. T.; SHISHIYANU, T. S.; STEFANOV, P. S.; GUEORGUIEV, V. K. (Technical University of Moldova, 2011)
    Diamond-like carbon films (DLC films) for cardiovascular implants have successfully been prepared by dual-target unbalanced magnetron sputtering and Rapid Photothermal Processing (RPP). It is found that the sputtering ...
  • New Investigation Technologies of the Cardiovascular System and of the Vegetative Nervous System 
    SCRIPNIC, V.; SONTEA, V.; ZATUȘEVSKI, I.; SAULEA, A.; ZEMȚOVSKI, E.; IAVORSCHI, A.; PÂRȚAC, V.; SOCOLOV, V.; ALEXEEVA, N. (Technical University of Moldova, 2011)
    Protecting and enhancing the health of the population is an important task for our country. Also financial resources targeted to medicine are insufficient to organize the effective functioning of medical institutions. In ...
  • Complex device for recording and signal processing of cardiac activity 
    SONTEA, Victor; IAVORSCHI, Anatolie; PAHOMI, Valerii; PÎRŢAC, Valeriu; ANGHILOGLU, Dmitri; RAILEAN, Sergiu (Technical University of Moldova, 2011)
    There are described structural scheme of the measurement system and processing of photopletismogram, interacting units, possibilities of software and interfaces in two modes of operation: the pc and with a special modul.there ...
  • Advanced Potential of the Photolpetismograph PPG-2 in the Non-invasive Vascular Diagnosis 
    SLOBOZEANU, A.; ZATUŞEVSKI, I.; CREŢU, A.; SONTEA, V. (Technical University of Moldova, 2011)
    Advanced sensor device for shape analysis of the tissue-reflected mean single period photoplethysmography (PPG) signals have been designed and clinically tested. The PPG signal shape reveals individual features of the ...
  • Device for Testing of Biological Material 
    BELIC, O.; ARAMĂ, E.; ŞTEFANEŢ, M.; IAVORSCHI, A.; PÎRŢAC, V.; BABUCI, A. (Technical University of Moldova, 2011)
    The conjunctive formations which stand at the basis of the ligamentous apparatus of different organs and systems, consists of dynamic structures which react promptly at multiple factors of both the internal and external ...
  • The Implementation of Modern Digital Technology in X-ray Medical Diagnoses in Republic of Moldova –a Stringent Necessity 
    ROSCA, Andrei (Technical University of Moldova, 2011)
    The study includes the analyses of state of technical X-ray diagnostic equipment from public medico-sanitary institution of Ministry of Health of Republic of Moldova (IMSP MS RM) at 01.01.11. The traditional RD apparatuses’ ...
  • Biomedical Physiotherapeutic Complex 
    DOROGAN, Valerian; SECRIERU, Vitalie; VIERU, Tatiana; VIERU, Stanislav; DOROGAN, Andrei; MUNTEANU, Eugeniu; BALICA, Ştefan (Technical University of Moldova, 2011)
    The paper describes the biomedical physiotherapeutic complex elaborated in Laboratory of Micro-Optoelectronics of the Technical University of Moldova. The elaborated complex includes the implementation of a large range of ...
  • Health Technology Management 
    SONTEA, Victor; STRATULAT, Petru; WERLEIN, Reinhold (Technical University of Moldova, 2011)
    Maintenance, Verification and Health Technologies Management became priorities in health policies of many countries, many studies show that coherent policies in this domain may improve the proportion price – efficiency of ...
  • Wave Model as a Physical Basis of an Algebra of Bio-and Nano-structures 
    MIRONOV, Bettin (Technical University of Moldova, 2011)
    Bio- and nano- structures have a feature in common – both display a long-range order over the distances significantly larger that the dimension of atom. While this cannot be explained on the basis of the Bohr atom model ...
  • Nanoperforated Indium Phosphide for Terahertz Imaging Bio-applications 
    ESINENCO, D.; SIRBU, L.; VODA, I.; GHIMPU, L.; MULLER, R.; VOICU, R.; DANILA, M.; LECA, A.; DASCALU, T.; TIGINYANU, I. M.; URSAKI, V. (Technical University of Moldova, 2011)
    We demonstrate the fabrication of thin InP membranes with porous compact packed structure that have been cut during electrochemical etching in the same anodic process. Besides, we show the possibility of pore filling with ...

Search DSpace


Advanced Search

Browse

My Account