DSpace Repository

Anodic titanium oxide and its pphotoelectrochemical and ttribocorrosion behavior

Show simple item record

dc.contributor.author CESIULIS, H.
dc.contributor.author MALIAR, T.
dc.contributor.author TSYNTSARU, N.
dc.contributor.author PODLAHA-MURPHY, E.
dc.date.accessioned 2019-10-25T10:34:06Z
dc.date.available 2019-10-25T10:34:06Z
dc.date.issued 2013
dc.identifier.citation CESIULIS, H., MALIAR, T., TSYNTSARU, N., PODLAHA-MURPHY, E. Anodic titanium oxide and its pphotoelectrochemical and ttribocorrosion behavior. In: ICNBME-2013. International Conference on Nanotechnologies and Biomedical Engineering. German-Moldovan Workshop on Novel Nanomaterials for Electronic, Photonic and Biomedical Applications: proc. of the 2th intern. conf., April 18-20, 2013. Chişinău, 2013, pp. 198-202. ISBN 978-9975-62-343-8. en_US
dc.identifier.isbn 978-9975-62-343-8
dc.identifier.uri http://repository.utm.md/handle/5014/5287
dc.description.abstract The obtained oxide films are continuous, amorphous, and the smoothest surface is obtained after Ti anodizing in 2 M H3PO4 + 0.05 M NH4F solution. At concentration of NH4F 0.2M, the nanotubes of TiO2 are formed at the temperatures 10-20°C and voltage 20V. The length of nanotubes determined by FIB technique is in the range 650-730 nm, and the diameter of pores is 60-80 nm. The photocurrents and photopotentials correlate with luorine incorporation into film, and the values of ones were obtained for films not included fluorine, i.e. for films obtained in pure 2M H3PO4. The anodic photovoltage up to 2 V (at constant current 1 A/cm2) and photocurrent up to 5 A/cm2 (at constant anodic potential 1.8 V) have been detected in 0.05M NaOH solution. Tribocorrosion tests were performed in a neutral solution, and changes of open-circuit potential as well as electrochemical impedance spectra were recorded with/without 0.4 N load. The metallic Ti (“as is”) and anodized Ti covered by TiO2 films immersed into 0.05 M H2SO4 + 0.2 M K2SO4 (pH 7) solution show passive behavior. TiO2 films destroyed during sliding tend to restore within 300–400 s after unloading. en_US
dc.language.iso en en_US
dc.publisher Tehnica UTM en_US
dc.rights Attribution-NonCommercial-NoDerivs 3.0 United States *
dc.rights.uri http://creativecommons.org/licenses/by-nc-nd/3.0/us/ *
dc.subject titanium anodization en_US
dc.subject titania film en_US
dc.subject photoelectrochemistry en_US
dc.title Anodic titanium oxide and its pphotoelectrochemical and ttribocorrosion behavior en_US
dc.type Article en_US


Files in this item

The following license files are associated with this item:

This item appears in the following Collection(s)

Show simple item record

Attribution-NonCommercial-NoDerivs 3.0 United States Except where otherwise noted, this item's license is described as Attribution-NonCommercial-NoDerivs 3.0 United States

Search DSpace


Advanced Search

Browse

My Account