Journal of Engineering Science: Recent submissions

  • Implementation of inductive processes in general-purpose equipment to streamline heat transfer processes 
    TURCANU, Adrian; NUCĂ, Ilie (Technical University of Moldova, 2024)
    The paper explores the energy efficiency of general-purpose installations, particularly the equipment used in the espresso coffee production process, and the unique functions of hydraulic systems. By implementing eco-design ...
  • Harnessing grape pomace: nutritional aspects, recovery and extraction techniques for health benefits 
    RUSEVA, Olga; COVALIOV, Eugenia; RESITCA, Vladislav; DESEATNICOVA, Olga; CAPCANARI, Tatiana; SUHODOL, Natalia (Technical University of Moldova, 2024)
    Nowadays, grapes represent the third most widely cultivated horticulture crop in the world. For the Republic of Moldova, grapes have been recognized as the most culturally important crop. About 70% of the total production ...
  • Exploring the micro and macro terroir of Fetească Neagră wine from Moldova 
    FEI, Wang; MEILING, Yao; GHEORGHE, Arpentin (Technical University of Moldova, 2024)
    This study delves into the intricate realm of Moldovan winemaking, focusing on the iconic Fetească Neagră grape variety. The research highlights the importance of indigenous grape varieties in shaping a unique wine identity ...
  • Possibilities of obtaining and valorizing dietary fibers in the context of the circular bioeconomy 
    ERŞOVA, Svetlana; SUHOVICI, Daria; CESKO, Tatiana; BARBAROȘ, Maria-Marcela; POPESCU, Liliana; GHENDOV-MOSANU, Aliona (Technical University of Moldova, 2024)
    This article aimed to review the recent literature on the characterization of dietary fibers and their role in the human body, focusing on the methods of extraction of dietary fibers from agro-food waste as well as their ...
  • Propanol detection device for the purpose of monitoring the quality of the environment 
    LITRA, Dinu; CHIRIAC, Maxim; LUPAN, Cristian; LUPAN, Oleg (Technical University of Moldova, 2024)
    The aim of this study was to develop and characterize CuO/Cu2O functionalized with AgPt nanostructures for gas sensing applications. Environmental pollution remains a pressing global concern, requiring effective detection ...
  • Evaluation of seismic forces according to Eurocode 8 and SNiP II-7-81. Comparative analysis 
    ȚURCAN, Vadim; ȘTASCOV, Mihail; CUTIA, Evgheni (Technical University of Moldova, 2024)
    The evaluation of seismic forces is very important for the design of all types of structures. In the present, Republic of Moldova is in a period of transition in the construction industry from the national design norms to ...
  • Methodology applied in the construction of structures using natural and alternative materials for stabilization works in road construction 
    DOBRESCU, Cornelia-Florentina; BRAGUȚA, Eugeniu; HAREA, Olga (Technical University of Moldova, 2024)
    The analysis of the current state of applications and the results of studies carried out at international level have led to the approach of an eco-efficient methodology for the recovery of waste generated from construction ...
  • Development of functional prototype of electrical lower esophageal sphinctor stimulator 
    VIDIBORSCHII, Vladimir (Technical University of Moldova, 2024)
    Scientific and technical innovations done since 1960s resulted in successful development and implementation in medical practice active implantable devices. Most of them are using traditional chemical batteries with limited ...
  • Mean-of-2-4 Quicksort 
    BOLUN, Ion (Technical University of Moldova, 2024)
    By combining the Median-of-three and Regrouping-3 quicksort methods, the Joint quicksort is proposed, largely free from the shortcomings of the first two. For example, the time complexity of Joint quicksort, in case of ...
  • Oversized road transport - particularities, realization conditions, problems and development perspectives 
    GARSTEA, Nina (Technical University of Moldova, 2024)
    Transport is in continuous evolution, regardless of the activity sector. Road transport faces various obstacles, and their management is a crucial part of planning and executing bulk transport operations. One of the main ...
  • Berry and grape metabolites for antimicrobial applications against foodborne bacterial pathogens 
    COJOCARI, Daniela; GHENDOV-MOSANU, Aliona; STURZA, Rodica (Technical University of Moldova, 2023)
    The increase in the resistance of microorganisms to chemical substances and conventional drugs presents a serious and obvious problem worldwide, which has determined numerous researches aimed at the identification of new ...
  • Ways of application of the circular bioeconomy in the wine industry 
    BORTA, Ana-Maria; STURZA, Rodica (Technical University of Moldova, 2023)
    The article reviews the conventional (composting, landspreading, tartaric acid, and grapeseed oil production) and novel ways of winemaking by-products biomass conversion with the manufacturing of value-added products to ...
  • The use of vegetable-derived proteins for new food products 
    MAZUR, Mihail; BULGARU, Viorica; CELAC, Valentin; ŞENSOY, Ilkay; GHENDOV-MOSANU, Aliona (Technical University of Moldova, 2023)
    Nowadays there is a high concern with newly-identified protein sources to substitute all kinds of proteins derived from animals. The food industry faces a challenge to produce quality food products that can feed more than ...
  • Land-use and transport integrated planning and modelling in Cluj-Napoca, Romania 
    CADAR, Rodica Dorina; BOITOR, Rozalia Melania; DRAGOMIR, Mihai Liviu (Technical University of Moldova, 2023)
    The paper presents an example of successful reconversion of an industrial site located in the built-in area of Cluj-Napoca, Romania. This case study shows that land-use and transport integrated planning can be effectively ...
  • Where is artificial intelligence going? 
    BĂJENESCU, Titu-Marius I. (Technical University of Moldova, 2023)
    Artificial intelligence (AI) is the ability of a machine to mimic human functions such as reasoning, learning, planning and creativity. AI enables technical systems to perceive the environment in which they operate, process ...
  • The optimization of video transmission quality in wireless networks 
    ȚURCANU, Dinu; ȚURCANU, Tatiana (Technical University of Moldova, 2023)
    The transmission of video stream over wireless networks is used by many applications and services, from the use of equipment in home communication networks to those carrying the video surveillance stream. Numerous technical ...
  • Embedded devices and methods for development of special noncontact applications 
    ZAPOROJAN, Sergiu; MUNTEANU, Eugeniu; LARIN, Vladimir; PAVEL, Victor; CHICU, Lilian (Technical University of Moldova, 2023)
    There are applications which require particular approaches for each of the used parts. The non-contact strain sensors based on microwires with positive magnetostriction requires specific technological processes starting ...
  • Annealing effect on UV detection properties of ZnO:Al structures 
    NAGPAL, Rajat; CHIRIAC, Maxim; SEREACOV, Alexandr; BIRNAZ, Adrian; ABABII, Nicolai; LUPAN, Cristian; BUZDUGAN, Artur; SANDU, Iulia; SIEBERT, Leonard; PAUPORTÉ, Thierry; LUPAN, Oleg (Technical University of Moldova, 2023)
    The aim of this study was to develop low-powered, highly selective UV sensor to continuously monitor personalized UV exposure as well as to study annealing effect on UV detection properties of the sensors. ZnO:Al structures ...
  • Technological transfer under the conditions of digitalization of products and processes 
    IATCHEVICI, Vadim; TOCA, Alexei; NITULENCO, Tatiana; STRONCEA, Aurel (Technical University of Moldova, 2023)
    Technological development is largely determined by technology transfer, which is conditioned by the absorption capacity of new technologies, and new technologies are deeply digitized technologies. Success depends on creating ...
  • Comparison and evaluation of classical methods of dimensional chains theory and their modern analogues 
    LEALIN, Stanislav (Technical University of Moldova, 2023)
    The requirements for the quality, reliability, and cost-effectiveness of engineering products and engineering production itself are constantly improving. As a result, there is an increasing demand for the quality of design ...

Search DSpace


Advanced Search

Browse

My Account