Nr. 2

Browse by

CONTENT

Author	Title	Page
TOROSYAN G. GHAZI A.	Technological design of furfural adsorption from water solutions	11
IEREMIA M.	Reconfiguration of the University Square based on an emblematic placement of the National Theatre	17
PROFIR A.	Modelling of cellular functions by means of timed membrane transducers	25
LUPAN O.	Analysis of ZnO-nanorods grown on p-Si (100) via catalystfree hydrothermal deposition	31
BOSTAN V.	http://repository.utm.md/handle/5014/921	37
TONU V. ŢULEANU C. DAUD V.	Research of homogeneity of fuel mixture in burners with different types of stabilizers	41
EVDOKIMOV R.	The comparative analysis of distributed power control algorithms in CDMA	46
SIMINIUC R.	Enzyme Linked Immuno Sorbent Assay for the quantitative analysis of prolamins of soryz (ELISA)	48
ŢURCANU T. LOZOVANU C.	ABC – costing as tool to efficient the process of technological changes and development of IT-enterprises	50
NISTOR D.	Creating consulting services in Moldova: case study CAA/proconsulting	55
BODEAN G.	Microprocessor verification by syntactically controlled generation of the test programs	60
CÂRSTEA C.	Design of a flexible and generic system of evaluation for complex informatics systems	68
PLEŞCA A.	Theoretical aspects related to junction temperature at power semiconductors	72
OPREA D.	The ways for energy conservation by energy production and consumption of electric energy	78
YANG B.	Parallel application launching on computer cluster	82
CIOBANU R.	Elaboration and research of planetary precessional multiplier	87
MORARU C.	Public utility expropriation	92
DULGHERU V.	Technical creativity and the future of engineering education	96
MANOLEA Gh.	Personalities from the meridians of the engineering universe	98

Recent Submissions

Research of homogeneity of fuel mixture in burners with different types of stabilizers

TONU, V.; ŢULEANU, C.; DAUD, V. (Technical University of Moldova, 2011)

This paper work presents the experimental stand for simulation of fuel mixture for research of combustion stability with different types of stabilizers. During the performed researches three types of stabilizers have been ...
Personalities from the meridians of the engineering universe

MANOLEA, Gheorghe (Technical University of Moldova, 2011)
Technical creativity and the future of engineering education

DULGHERU, Valeriu (Technical University of Moldova, 2011)
Public utility expropriation

MORARU, C. (Technical University of Moldova, 2011)

In this study the author like to reveal the institution of expropriation contents for public use, the necessary legal procedures making the expropriation. One of the main objectives is: to analyze the degree of regulatory ...
Elaboration and research of planetary precessional multiplier

CIOBANU, R. (Technical University of Moldova, 2011)

The multiplier is an indispensable part of the micro hydropower plant and high power wind turbine. It helps to increase rotor low speeds limited by the water flow small velocity and by the relative big placement diameter ...
Parallel application launching on computer cluster

YANG, Bing-Lin (Technical University of Moldova, 2011)

Using computer cluster is a great solution to practice parallel computing. We describe a web interface for parallel three level application, named Visual Membrane Petri Nets, designed for modelling and simulation of ...
The ways for energy conservation by energy production and consumption of electric energy

OPREA, D. (Technical University of Moldova, 2011)

The important part of future energy balance for all national economies represents the possible saving of energy. For example, the EU plans to reach by effective use of energy the decreasing of energy demand by 20 % until ...
Design of a flexible and generic system of evaluation for complex informatics systems

CÂRSTEA, C. (Technical University of Moldova, 2011)

It is a well - known fact that making the decisions without having the target to make them work, is usually without effect. The same can be said about the planning activity, which will bring lesser benefits if it is not ...
Microprocessor verification by syntactically-controlled generation of the test programs

BODEAN, G. (Technical University of Moldova, 2011)

This paper presents an approach to synthesis of stylistically and syntactically controlled generator of the microprocessor test verification programs. The dependence of test length of the confidence level and the probabilities ...
Creating consulting services in Moldova: case study CAA/proconsulting

NISTOR, D. (Technical University of Moldova, 2011)

The aim of the paper is to analyze the development of the management consulting services in Moldova. The market management consultancy services in Moldova is still under developed. the commercial market for management ...
ABC – costing as a tool to efficient the process of technological changes and development of IT-enterprises

ŢURCANU, T.; LOZOVANU, C. (Technical University of Moldova, 2011)

In this paper we argue the necessity of changes in the field of informational technology. The paper describes and analyzes the process of technological changes made in IT domestic enterprise, by highlighting the strength ...
Enzyme Linked Immuno Sorbent Assay for the quantitative analysis of prolamins of soryz (ELISA)

SIMINIUC, R. (Technical University of Moldova, 2011)

In this article are described the features of ELISA method for determining the content of gliadin in cereals, also and the quantitative determining results for toxic prolamins of soryz.
The comparative analysis of distributed power control algorithms in CDMA

EVDOCHIMOV, R. (Technical University of Moldova, 2011)

In given article results of comparison of the various distributed power control algorithms, through their modelling in the environment of MATLAB, on the basis of the Carrier to Interference Ratio (CIR), by two criteria: ...
Argumentation of the hydrodynamic profile of the micro-hydro powerstation rotor’s blades

BOSTAN, Viorel (Technical University of Moldova, 2011)

Research and elaboration of the systems for conversion of renewable energy sources (RSE) as a research objective presents great interest and importance. A new design and functional concept of a micro-hydro power station ...
Analysis of ZnO-nanorods grown on p-Si (100) via catalystfree hydrothermal deposition

LUPAN, Oleg (Technical University of Moldova, 2011)

This work reports a detailed cleaning procedure for Si to get deposited ZnO at low temperature (95-98°C). Also, it is reported on rapid hydrothermal synthesis technique used to growth ZnO nanorod arrays on p-Si in 15 min. ...
Modelling of cellular functions by means of timed membrane transducers

PROFIR, A. (Technical University of Moldova, 2011)

In this paper we propose two new formalisms, named deterministic finite timed transducer and timed membrane transducer to model the molecular machinery, which plays a central role in receiving, storing, processing and ...
Reconfiguration of the university square based on an emblematic placement of the National Theatre

IEREMIA, M. (Technical University of Moldova, 2011)

The buildings that compose The National Theatre of Bucharest assembly were designed between 1963 and 1968. There weren’t any significant degradations of the structural elements after the 1977 earthquake. On 17.08.1978, a ...
Technological design of furfural adsorption from water solutions

TOROSYAN, Gagik; GHAZI, Aidan (Technical University of Moldova, 2011)

Furfural exists in significant percentage of petroleum products as solvent and refining agent. This organic compound entering soil and groundwater system is considered as a serious problem is that all have some acute and ...

Nr. 2

Nr. 2

Browse by

CONTENT

Recent Submissions

Search DSpace

Browse

All of DSpace

This Collection

My Account

Discover

Author

Subject

Date Issued

Has File(s)

RSS Feeds